Important Safety Instructions - Marshall Amplification Valvestate 2000 AVT Manual

Hide thumbs Also See for Valvestate 2000 AVT:
Table of Contents

Advertisement

!
WARNING! - Important safety instructions
A
ALWAYS fit a good quality mains plug conforming to the latest B.S.I. standards where
necessary (UK only).
B
NEVER attempt to by-pass the fuses or fit ones of the incorrect value.
C
DO NOT attempt to remove the amplifier chassis, there are no user serviceable parts.
D
Refer all servicing to qualified service personnel including replacement of fuses and
valves. Servicing is required when the apparatus has been damaged in any way, such as
the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally or has been dropped.
E
NEVER use an amplifier in damp or wet conditions.
F
ALWAYS unplug this apparatus during lightning storms or when unused for long periods of
time.
G
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and at the point where they exit from the apparatus.
H
DO NOT switch the amplifier on without the loudspeaker connected.
I
ENSURE that any extension cabinets used are of the correct impedance.
J
PLEASE read this instruction manual carefully before switching on.
Note: This equipment has been tested and found to comply with the requirements of the EMC
directive in the E.U.
CAUTION: Any changes or modifications not expressly approved by the party responsible for
compliance may void the users authority to operate the equipment.
WARNING : This apparatus must be earthed!
WARNING : Do not obstruct ventilation grille and always ensure free movement of air around the
amplifier!
USA ONLY - DO NOT defeat the purpose of the polarised or grounding type plug.
A polarised plug has two blades with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade or the third prong are provided for your
safety. When the provided plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
FOLLOW ALL INSTRUCTIONS AND HEED ALL WARNINGS
KEEP THESE INSTRUCTIONS !
2

Advertisement

Table of Contents
loading

Table of Contents