Capture Mode; Capturing Images - Rollei RCP-8427XW User Manual

CAPTURE MODE

Capturing Images

Your camera is equipped with a 2.7" full color TFT LCD monitor to help you compose
images, playback recorded images/video clips or adjust menu settings.
1. Press the ON/OFF button to turn the power on.
The status LED lights green and the camera is initiated.
When the power is turned on, the camera will start in the mode that was last set.
If the power is turned on in [
is ready for shooting. In both modes, if the mode switch is set to [ ], the lens
barrel will retract into the camera body after 30 seconds.
If the power is turned on in [ ] mode, the lens will remain closed.
2. Slide the mode switch to [
3. Compose your image in the LCD monitor.
Pressing the
LCD monitor.
Pressing the
4. Press the shutter button.
Pressing the shutter button down halfway
automatically
exposure, and pressing the shutter button
down fully captures the images.
The focus area frame turns green when the
camera is in focus and the exposure is
calculated.
When the focus or exposure is not suitable,
the frame of the focus area turns red.
If the photographic preview is set to [On],
the captured image will be displayed while the image is being recorded onto the
SD/SDHC memory card.
EN-16
] or [ ] mode, the lens will extend forward and it
].
button zooms in on the subject, and enlarges the subject on the
button provides a wider angle image.
focuses and adjusts
b
the
a