Rear Panel - Ricoh MP7040S Series Manual

2.2 Rear panel

Option connector
Audio output connector
Name
Power Connector
SCSI interface connector Use a 50 pin double-end flat SCSI cable to
Option connector
Audio output connector
4
SCSI interface connector
Connects to the power supply (5- and 12-V
DC) of the host computer.
Be careful to connect with the proper po-
larity. Connecting the wrong way may dam-
age the system (and is not guaranteed).
connect to the SCSI interface.
Connecting or disconnecting connectors
while power is on may result in a short cir-
cuit, causing damage to the equipment.
When connecting or disconnecting con-
nectors, make sure to turn off the power
beforehand.
Used when selecting the SCSI ID number.
Don't use jumpers to change anything besides
the SCSI ID, but keep the drive as initially
set(no jumper pins: ID 0) SCSI ID changes
become valid after power is turned off, then
on again.
Installing jumper pins besides the ones for
SCSI ID settings may be the cause of dam-
age or abnormal drive operation.
Provides output to a sound card.
Power connector
Function