Setting Up Tcp/Ip; For Windows 98 - Siemens SLI-5310 User Manual

Setting up TCP/IP

In order to access the Internet through the IAD, each host on your
network must install/setup TCP/IP first. Please follow the steps below
to set your network adapter.
If the TCP/IP protocol has not been installed yet, please follow the steps below for
installation. In the following illustrations, we will set the PC to get an IP address
automatically at the same time.

For Windows 98

1. Open the Start menu,
point to Settings and
click on Control Panel.
2. Double-click the Network icon.
Chapter 2: System Requirement and Installation
25