Advertisement
74878b-0920.qrk
6/19/01
10:48 AM
Hint: Apply the labels as shown in the following illustrations. For best results, wash your hands before applying the labels and
make sure the areas to which the labels will be applied are clean and dry. Avoid repositioning a label once it has been applied.
• Apply the labels to the railroad crossing, as indicated in
the illustration.
• Fit the railroad crossing plug into the slot in the track.
• Apply the labels to the station, as indicated in
the illustration.
• Insert and "snap" the hooked tabs on the station into
the slots in the track.
Page 5
• Apply the label to the barn, as indicated in the illustration.
• Insert and "snap" the hooked tab on the barn into the slot
in the track.
• Fit the posts on the fence into the holes in the track.
• Apply the label to the tunnel, as indicated in the illustration.
• Insert and "snap" the four hooked tabs on the tunnel top
into the four slots in the tunnel track. Pull up on the tunnel
top to be sure it is secure.
Note: This is a one-time assembly.
Advertisement
