Advertisement
74878b-0920.qrk
6/19/01
10:48 AM
• Locate the battery compartment on the underside of
the microphone.
• Loosen the screw in the battery compartment door
with a Phillips screwdriver and open the door.
• Insert three "AAA" (LR03) alkaline batteries, as
indicated in the battery compartment.
• Replace the battery compartment door and tighten
the screw with a Phillips screwdriver.
Do not over-tighten.
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use. Always remove exhausted batteries from the toy. Battery leakage and
corrosion can damage this toy. Dispose of batteries safely.
• Do not dispose of batteries in a fire. The batteries may explode or leak.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in the "Battery Installation" instructions are to be used.
• If removable rechargeable batteries are used, they are only to be charged under adult supervision.
• Rechargeable batteries are to be removed from the toy before they are charged.
• If you use a battery charger, it should be examined regularly for damage to the cord, plug, enclosure and other parts. Do not
use a damaged battery charger until it has been properly repaired.
Page 3
• Locate the battery compartment on the underside
of the engine.
• Loosen the screw in the battery compartment door
with a Phillips screwdriver and open the door.
• Insert four "AA" (LR6) alkaline batteries, as
indicated in the battery compartment.
• Replace the battery compartment door and
tighten the screw with a Phillips screwdriver.
Do not over-tighten.
Advertisement
