Storage Method for Panel Protection
Correct Method
Panel
If the product needs to be set upright, hold both
sides of the product, and tilt backward carefully
for. Do not let the panel not to touch the floor.
Panel
When laying down the product, lay a cushion on a
flat floor. Put the product on it with the panel of
the product facing down.
Panel
If there is not a cushion available, ensure the floor is
clean and then lay the product down carefully with the
panel facing either upward or downward. At this time,
be careful for objects not to fall on the panel.
Incorrect Method
If the product is tilted onto the bezel, the bottom of
the panel may be damaged.
Cushion
If the product is tilted onto the edge of the panel,
the panel may be damaged.
ASSEMBLING AND PREPARING
Panel
Panel
7