Samsung 451 User Manual page 70

Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
Viewing the Menus
With the power on, press the MENU button.
1
The main menu appears on the screen.
The menu's left side has icons: Picture, Sound,
Channel, Setup, Input.
Press the or button to select one of the icons.
2
Then press the ENTER button to access the
icon's sub-menu. Press the EXIT button to exit.
The on-screen menus disappear from the
screen after about one minute.
Storing Channels in Memory
(Automatic Method)
Press the MENU button to display the menu.
1
Press the or button to select "Channel", then
press the ENTER button.
Press the or button to select "Auto Program",
2
then press the ENTER button.
Press the or button to select the antenna
3
connection, then press the ENTER
TV Auto Program
Selects the antenna to execute the Auto
Program function.
Air
Cable
Auto
Move Move Enter Enter
When selecting the Cable TV system:
4
Press the ENTER button to start the auto
program.
Press the or button, then press the
select the correct analog signal cable system source
among "STD", "HRC", and "IRC".
Press the ENTER button.
If you have Digital cable TV, select the cable system
signal source for both Analog and Digital.
TV Auto Program
Selects a cable signal type for your location.
Analog
STD Start
HRC
IRC
Digital
STD
HRC
IRC
Move Enter
Move Enter
5
To Stop the Auto Program Function
Press the MENU button while the Auto Program function is
being executed. You can also press the ENTER
button.
to stop the setup.
Checking to see if Channels were Stored in Memory
Start
Press the CH button. Only the channels stored in memory
Start
will be selected (in order).
Start
Selecting the antennas
Return Return
• Air: "Air" antenna signal.
• Cable: "Cable" antenna signal.
• Auto: "Air" and "Cable" antenna signals.
or to
Return
Return
English-8
The TV begins memorizing all available stations.
After all the available channels are stored, it start to
remove scrambled channels.
Press the EXIT button to exit.
Auto Program Auto Program Plug & Play
Auto Program in Progress.
DTV Cable : -- Cable : 11
Cable 24
11 %
Stop
Enter Return
Auto Program Auto Program Plug & Play
Removing scrambled channel.
DTV Cable 55
80 %
Stop
Enter Return
button