Video Connection - Samsung 451 User Manual

Connecting a VCR

Video Connection

VCR Rear Panel
5
4
3
Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape.
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
S-Video Connection
VCR Rear Panel
3
2
1
TV Rear Panel
Audio Cable (Not supplied)
Video Cable (Not supplied)
RF Cable (Not supplied)
TV Rear Panel
Audio Cable (Not supplied)
S-Video Cable (Not supplied)
RF Cable (Not supplied)
English-5
Unplug the cable or antenna
1
from the back of the TV.
Connect the cable or antenna
2
to the ANT IN terminal on the
back of the VCR.
Connect an RF Cable between
3
the ANT OUT terminal on the
VCR and the ANT IN terminal
on the TV.
Connect a Video Cable between
4
the VIDEO OUT jack on the
VCR and the AV IN [VIDEO] jack
on the TV.
Connect Audio Cables between
5
the AUDIO OUT jacks on the
VCR and the AV IN [R-AUDIO-L]
jacks on the TV.
If you have a "mono" (non-stereo)
VCR, use a Y-connector (not
supplied) to hook up to the right
and left audio input jacks of the
TV. If your VCR is stereo, you
must connect two cables.
To begin, follow steps 1–3 in
1
the previous section to connect
the antenna or cable to your
VCR and your TV.
Connect an S-Video Cable
2
between the S-VIDEO OUT jack
on the VCR and the AV IN
[S-VIDEO] jack on the TV.
Connect Audio Cables between
3
the AUDIO OUT jacks on the
VCR and the AV IN [R-AUDIO-L]
jacks on the TV.
An S-Video cable may be included
with a VCR. (If not, check your local
electronics store.)
Each VCR has a different back
panel configuration.
When connecting a VCR, match
the color of the connection
terminal to the cable.