Powersaver - Samsung SyncMaster 700S Owner's Instructions Manual

Chapter Three: Adjusting Your Monitor

PowerSaver

State Normal
Operation
Horizontal Sync Active
Vertical Sync Active
Video Active
Power Green
Indicator
Power 1OOW (max.)
Consumption 90W (nominal)
10
This monitor has a built-in power management system
called PowerSaver. This system saves energy by switching
your monitor into a low-power mode when it has not been
used for a certain amount of time. The available modes
are "On," "Standby," "Suspend," and "Off."
This system operates with a VESA DPMS compliant video
card installed in your computer. You use a software utility
installed on your computer to set up this feature. See the
table below for details.
Power Saving function mode EPA/NUTEK
Standby mode
Inactive
Active
Blanked
Amber
55W (nominal)
NOTE: This monitor automatically returns to normal opera-
tion when horizontal and vertical sync return. This occurs
when you move the computer's mouse or press a key on
the keyboard.
This monitor is EPA Energy Star compliant and NUTEK
compliant when used with a computer equipped with VESA
DPMS functionality. If your computer system cannot sup-
port a display power management function, you can pur-
chase an optional DPMS software program to enable the
power saving function. Please contact Samsung or your
dealer for more information.
For energy conservation, turn your monitor OFF when it is
not needed, or when leaving it unattended for long periods.
Suspend mode Power-off Mode
Position A1 Position A2
Active Inactive
Inactive Inactive
Blanked Blanked
Amber/Green Amber
Blinking Blinking
Less than 15W Less than 8W