Function Keys; Set Key; Up Arrow Key; Down Arrow Key - La Crosse Technology WS-2812U-IT Operation Manual

Position the display station to receive data from the thermo-hygro sensor and send data to the
USBTRX-10, which plugs into the computer and downloads information to the Heavy Weather
Pro PC software.
Read the Release Notes to verify the correct software version and download the free Heavy
Weather Pro PC software at:
The Software User's Guide is found in the ?|Help menu item in the software after installation.

FUNCTION KEYS:

SET KEY

 Press and hold for 3 seconds to enter the SET mode, where the following can be
changed: LCD contrast, Manual time setting, 12/24 hour time display, Date setting, °F/°C
temperature unit, Wind speed unit, Rainfall unit, Pressure unit, Relative pressure
reference setting, Weather tendency threshold setting, Storm warning threshold
setting, Storm Alarm On/ Off setting, Wind direction display type, and Factory reset
 Press to toggle between the display of Mode 1 or Mode 2:
o Mode 1: "Wind speed + outdoor temp + 24 hr. pressure history graph"
o Mode 2: "Gust + Dew Point temp + 72 hr. pressure history graph "
 In the weather alarm setting mode, press to switch the weather alarm On / Off
 In the weather alarm setting mode, press and hold to adjust the weather alarm value
 Stop the weather alarm when ringing

▲UP ARROW KEY

 Press to toggle between the display of seconds or date in the time display
 Press to increase the level of different settings in SET mode
 Press and hold to re-learn the thermo-hygro sensor synchronization
 Press to reset the MIN/MAX record when in MIN/MAX display mode
 Stop the weather alarm when ringing

▼DOWN ARROW KEY

 Press to switch the rainfall display mode: Total, 1h, 24h, week, month
 Press to decrease the level of different settings in SET mode
 Synchronize the display with the PC (see Heavy Weather Pro Software User's Guide)
 Stop the weather alarm when ringing

ALARM KEY

 Press to enter the time alarm and weather alarm setting mode
 Confirm particular alarm setting
 Press to exit the manual setting mode
 Stop the alarm when the time alarm or weather alarm rings
 Press to exit max/ min record display mode
http://www.lacrossetechnology.com/support/software.php
P a g e | 10