Radio, Hd Radio™ Tuner And Sirius Xm Radio Operation; Radio/Hd Radio Tuner Basic Operation - Kenwood DNX7190HD Instruction Manual

Return to the Top page
Radio, HD Radio, SIRIUS XM
R
adio, HD Radio™ tuner and SIRIUS XM Radio Operation

Radio/HD Radio tuner Basic Operation

Most functions can be controlled from the source control screen.
NOTE
• Set the remote controller mode switch to AUD mode before starting operation, see
mode (P.105).
• HD Radio broadcasting can be received only by the DNX7190HD, DNX6990HD, and DNX6190HD.
• HD Radio broadcasting is for North American sales area only.
• The screen shot below is for tuner. It may be different from the one for HD Radio broadcasting.
Simple Control screen
1
2
3
4
1 PS/Station name display
Displays the PS name or station name.
2 Information display/Control switching area
Displays the following information.
• Picture: The picture data or station Logo data is displayed if available from current content.
• [FM1] etc.: Band display
• MHz/kHz: Frequency display
• Preset #: Preset number
• HD# (HD Radio tuner only): Channel display
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
Touch to switch the multi function menu. For details on the menu, see
4 Preset key/Multi function menu
Recalls the memorized station or channel. When touched for 2 seconds, stores the current receiving
station or channel in memory.
When switched, various functions can be performed by using keys in this area.
For details on the menu, see Multi function menu
5 Sub function key
Touch to display "Sub function menu" (7 in this table).
50 50
Switching the operation
List Control screen
5 3 8
4
Multi function menu (P.51).
(P.51).
6 Preset list
Displays the list of preset stations or channels and the information.
7 Sub function menu
The following functions can be performed by using keys in this area.
• Switches the band: Touch [AM] or [FM].
• Tunes in a station: Touch [1] [¡]. The method of frequency switching can be changed. See
• Selects a channel (HD Radio tuner only): Touch [CH∞] or [CH5].
• Tunes in by entering direct number (HD Radio tuner only):
Touch [ ] and enter the desired number. For details, see
The bar in center (tuner only) shows the current frequency location.
8 List switching key
Touch to switch between the preset list and the information list.
In tuner mode, radio text plus will be displayed.
In HD Radio tuner mode, tuned program information will be displayed.
2
Multi function menu
6
Tuner
7
The functions of each key are as follows.
[P1] - [P6]
Selects the preset station. Touch for 2 seconds to store the current station into the preset memory.
[ ]
Displays the list of preset stations or channels.
[TI] (FM Tuner and HD Radio tuner only)
Sets the traffic information mode on. For details, see
[SEEK]
Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].
• AUTO1: Tunes in a station with good reception automatically.
• AUTO2: Tunes in stations in memory one after another.
• MANUAL: Switches to the next frequency manually.
[AME]
Selects the auto memory mode. For details, see
[PTY] (FM Tuner and HD Radio tuner only)
Searches a program by setting program type. For details, see
[CRSC] (FM Tuner only)
Switches to monaural to decrease noise when reception is poor.
[RCV] (HD Radio tuner only)
Switches the receive mode in the following sequence; [AUTO], [DIGITAL], [ANALOG]. For details, see
Receive Mode
[ SETUP]
Touch to display the SETUP Menu screen. See
function menu (P.51).
Direct search
HD Radio tuner
Traffic Information
Auto memory (P.56).
Search by program type
(P.59).
Setting Up (P.82).
Return to the Top page
Radio, HD Radio, SIRIUS XM
Multi
(P.57).
(P.58).
(P.57).
Continued
51