Roper B875 Use And Care Manual page 13

Gas built-in oven
Table of Contents

Advertisement

TO BAKE
OR ROAST
PUSH WHEN
FINISHED
The red display will show the oven temperature
as it rises (in
5;" steps).
A tone will sound when the oven is ready
PUSH
0
3
PUSH
The ERC will calculate when to turn the oven off.
When the stop time is reached, a tone will sound and the
oven will turn off,
DELAYED BAKE CYCLE
I URN TO
TURN
TO
TURN TO
SET LENGTH
SET TEMP
SET OVEN
I
CANCEL
TIMER
CLOCK ;j;
CLEAN cTF)Mo BROIL
BAKE
PUSH
PUSH
PUSH
When cook time has ended, a tone will sound and the oven
will turn off.
TO USE THE TIMER
TURN TO
SET AMOUNT
2
OF TIME
0
\
,
/
0
1
PUSH
73
3
PUSH AND HOLD
3 SECONDS TO CANCEL
A tone will sound when time is up.
NOTE: The timer is a reminder only and will not operate
. .
tne oven.
INCOMPLETE
OR INCORRECT
SETTINGS
1
Attention Tone will sound if oven has only been partially
programmed.
For example, if you have selected a cook
time but no temperature, you will heartheAttentionTone
until you select a temperature
or push CANCEL.
2
Function Error Tone will sound if there is a problem with
one of the range functions.
Cancel the tone by pushing
the CANCEL button.
If the tone starts again, call for
service.
RECALLING
FUNCTIONS
You may recall any set function by pushing the button of that
function
12
CANCELLING
TONES
If you prefer that your range not have a tone whenever you
push a button, you can eliminate those tones by pushing and
holding the CANCEL button until you hear a beep. Repeat
to activate tones again.
PREHEATING
FOR AUTOMATIC
OVEN
OPERATIONS
Cooktimesprogrammedforautomaticovenoperationsstart
counting down when the oven first comes on, not when it has
reached the set temperatures.
It takes 10 to 15 minutes to
reach the set temperature, thus additional cook time may be
necessary.
CCTLOl -7

Advertisement

Table of Contents
loading

Table of Contents