Battery Replacement - Fisher-Price TOUCH AND CRAWL FRIEND C1414 Instruction Sheet

Bottom
Cover
For best performance, we
recommend replacing the batteries
that came with this toy with three,
new alkaline "AA" (LR6) batteries.
• Loosen the screws in the bottom cover
of the toy with a Phillips screwdriver.
Remove the bottom cover.
• Rotate the motor unit inside the toy to
access the battery compartment door.
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Remove the exhausted batteries and
throw them away.
• Insert three "AA" (LR6) alkaline
batteries.
Hint: We recommend using
alkaline batteries for longer life.
• Replace the battery compartment
door and tighten the screws with
a Phillips screwdriver. Do not
over-tighten.
• Replace the bottom cover and tighten
the screws with a Phillips screwdriver.
Do not over-tighten.
• When sounds, lights or motions from
this toy become faint or stop, it's time
for an adult to change the batteries!

Battery Replacement

3
Motor
Unit
1.5V x 3
"AA" (LR6)
Shown Actual Size
Battery Safety Information
Batteries may leak fluids that can
cause a chemical burn injury or ruin
your toy. To avoid battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or recharge-
able (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the toy.
Dispose of batteries safely. Do not
dispose of batteries in a fire. The
batteries may explode or leak.
• Never short-circuit the bat-
tery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-recharge-
able batteries.
• Remove rechargeable batteries from
the toy before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.