Round End And Keyhole Buttonholes - Janome DC 3018 Instruction Book

q
1
1
1
1
1
1
w
w
q
w
q
q w
w
q
Round-end and keyhole buttonholes
Machine settings
q Stitch pattern: #17 or #18
w Foot:
Automatic buttonhole foot R
Sewing procedure is the same as for the square
buttonhole #16.
q Starting point
w Bartacking
Altering the buttonhole width
Round-end buttonhole
Press the mode key
adjustment.
Press the plus (+) key to increase the buttonhole
width.
Press the minus (–) key to decrease the buttonhole
width.
q Narrower buttonhole
w Wider buttonhole
* The width can be altered between 2.5 and 5.5.
Keyhole buttonhole
Press the mode key
adjustment.
Press the plus (+) key to increase the buttonhole
width.
Press the minus (–) key to decrease the buttonhole
width.
q Narrower buttonhole
w Wider buttonhole
* The width can be altered between 5.0 and 7.0.
* See page 23 for altering the stitch density.
24
to activate the stitch width
to activate the stitch width