Fisher-Price T1828 User Manual page 3

IMPORTANT! Please remove all parts from the package and identify
them before assembly. Some parts may be packed in the pad.
Pad
Retainer
Left Base Wire
Base Tube
M5 x 20 mm Screw – 4
Note: Screw shown actual size. Tighten or loosen all screws
with a Phillips screwdriver. Do not over-tighten the screws.
Parts
Seat Back Tube
2 Feet
Right Base Wire
IMPORTANT! Before assembly and each use, inspect this product
for damaged hardware, loose joints, missing parts or sharp edges.
DO NOT use if any parts are missing or broken. Contact Fisher-Price
for replacement parts and instructions if needed. Never substitute parts.
Toy Bar
Left Base Wire
1
Retainer
• Place the base tube on a flat surface.
• Position the left and right base wires as shown.
Footrest
• Fit the left base wire and right base wire into the base tube.
2
• Position the feet so the non-skid surface is down.
• Fit the feet on the base tube, as shown.
3
Assembly
Base Tube
Right Base Wire
Non-skid Surface
®