Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for IMC Networks McPC/PC
Summary of Contents for IMC Networks McPC/PC
- Page 1 McPC/PCI (TP-TX/FX) Operation Manual...
-
Page 2: Fcc Radio Frequency Interference Statement
At its option, IMC Networks will repair or replace at no charge the product which proves to be defective within such warranty period. This limited warranty shall not apply if the IMC Networks product has been damaged by unreasonable use, accident, negligence, service or modification by anyone other than an authorized IMC Networks Service Technician or by any other causes unrelated to defective materials or workmanship. -
Page 3: Table Of Contents
Table of Contents FCC Radio Frequency Interference Statement ............ii Warranty......................ii About the McPC/PCI (TP-TX/FX) Media Converter (TX/FX)........1 Twisted Pair Crossover/Pass-Through Button ............2 LED Indicators....................2 Specifications .....................2 IMC Networks Technical Support...............3 Fiber Optic Cleaning Guidelines.................3 Safety Certifications....................4... -
Page 4: About The Mcpc/Pci (Tp-Tx/Fx) Media Converter (Tx/Fx)
About the McPC/PCI (TP-TX/FX) Media Converter (TX/FX) The McPC/PCI (TP-TX/FX) is an IEEE 802.3 single-conversion, 10/100 switching PC card media converter. It converts 10/100 twisted pair connections to 100Base-FX 1300 nm multi-mode or 1310 nm single-mode fiber optics. The fiber port always operates at 100 Mbps FDX;... -
Page 5: Twisted Pair Crossover/Pass-Through Button
Twisted Pair Crossover/Pass-Through Button Whether you are using crossover or straight-through CAT5 twisted pair cabling, McPC/PCI (TP-TX/FX) will support both types of connections with AutoCross, a feature which automatically selects between a crossover workstation or Pass-Through connection depending on the connected device. LED Indicators Each McPC/PCI (TP-TX/FX) includes two LEDs, located on the RJ-45 connector. -
Page 6: Imc Networks Technical Support
Dust caps are installed at IMC Networks to ensure factory-clean optical devices. These protective caps should not be removed until the moment of connecting the fiber cable to the device. Should it be necessary to disconnect the fiber device, reinstall the protective dust caps. -
Page 7: Safety Certifications
(73/23/EEC). Certified to Safety of Information Technology Equipment, Including Electrical Business Equipment. For further details, contact IMC Networks. European Directive 2002/96/EC (WEEE) requires that any equipment that bears this symbol on product or packaging must not be disposed of with unsorted municipal waste. - Page 8 The information in this document is subject to change without notice. IMC Networks assumes no responsibility for any errors that may appear in this document. McPC/PCI (TP-TX/FX) is a trademark of IMC Networks. Other brands or product names may be trademarks and are the property of their respective companies.