Hp Mpio Eva Dsm Event Log Messages - HP MPIO Installation And Reference Manual

Event ID
37
38

HP MPIO EVA DSM event log messages

Table 5 lists the HP MPIO EVA DSM event log messages and provides a description of each message.
Table 5 HP MPIO EVA DSM event log messages
Event ID
101
102
103
107
108
109
1 10
1 1 1
Message
DSM_name is attempting an
operation on pseudo-LUN.
The Type is noted in the
dump data.
A device under pseudo-LUN,
being controlled by
DSM_name was removed,
but the DSM failed the
operation.
Message
Discovered a new multipath
capable disk with serial
number X; first path SCSI
address Y.
A new path (SCSI address
Y) was added to existing
multipath capable disk X.
The path (SCSI address Y)
to multipath capable disk
X has recovered.
The preferred path (SCSI
address Y) for multipath
capable disk X has been
restored.
The DSM has completed
remove processing for
path (SCSI address Y) to
multipath capable disk X.
The DSM (version X) has
been started successfully.
The previously failed
multipath capable disk X
has recovered.
The removal event
notifications for
multipath capable disk
X have been disabled upon
request.
HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 3.00.00
Description
DSM_name has called
DSMNotification on a
pseudo-LUN.
An MPIO call to DSM's
RemoveDevice operation failed.
Description
A new multipath disk has been discovered. X
represents the serial number of the new disk. Y is
the SCSI address of the first path to this disk.
A new path to an existing multipath disk has been
discovered. X represents the serial number of the
disk. Y is the SCSI address of the new path that
was found.
A failed path to an existing multipath disk has
recovered. X represents the serial number of the
disk. Y is the SCSI address of the path that has been
recovered.
A previously selected path has been restored as the
preferred path for I/O operation. X represents the
serial number of the disk. Y is the SCSI address of
the preferred path that has been restored.
The DSM has completed processing the removal
notification for a path to a given multipath disk. X
represents the serial number of the disk. Y is the
SCSI address of the path for which the removal
notification has been processed.
The DSM has successfully completed the initialization
during startup. X is the version of the DSM.
This message is logged when the DSM detects that
a previously failed (inoperative) multipath capable
disk with serial number X has recovered and
become operational again.
This event is logged when generation of removal
event notifications (Event IDs 304, 302 and 108) for
the multipath capable disk with serial number X has
been disabled upon request in the DSM.
Contents of the
data dump
The type of
notification called
by DSM
DSM ID of the failed
attempt
39