Termiotermio; Register Dumpregister Dump - HP EISA/PCI Multiplexer Manual

Figure 36 Data scope capture data screen
The data can be captured and saved for later review. The default file name for input data is
/tmp/eqnin and the default file name for output data is /tmp/ eqnout. If desired, the data scope
can be configured to run continuously. You can specify whether to view receive data, send data
or both.
Termio
Highlight Termio and press Return key. This selection displays general terminal interface data
associated with the port (see Figure 6- 1 2). It is similar to the stty command in that it displays all
enabled termio flags.
Figure 37 Termio flags display
Register Dump
Highlight Register Dump and press Return key. This option (see Figure 6- 13) displays a real-time
window of the on-board registers.
38 Troubleshooting and Diagnostics