Instruction For Wall Mount - RCA RLED4664A Operating Instructions Manual

46" 1080p led television
Table of Contents

Advertisement

3. Instruction for Wall Mount

A wall mount kit (purchased separately) would allow you to mount your RCA
TV on the wall. For detailed information on installing the wall mount, refer
to the instructions provided by the wall mount manufacturer. It is strongly
recommended to contact a technician for professional assistance for wall mount
installation. RCA is not responsible for any damage to the product or injury to
yourself or others resulting from the wall-mounting.
-
This
RCA
TV is compatible with a 400mm x 400mm mounting hole pattern.
- 4 pcs of type MB6 screws are required for installing the wall mount bracket to
your
RCA
TV. Do not use screws that are longer than 12 mm. Screws that
are too long may cause damage to the inside of the TV set.
- Do not fasten the screws too tight for this may damage the TV or cause the
TV to fall, resulting in personal injury.
incidents
- Do not mount your RCA TV at more than a 15 degree tilt.
- Always use two people to mount the TV to a wall.
- Do not install your Wall Mount Kit while your TV is turned on. It may result in
personal injury due to electric shock.
Introduction
Dimensions for Mounting Hole Pattern
400mm
400mm
RCA
is not liable for these kinds of
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rled3265aRled3264aRlcd5092a

Table of Contents