Table of Contents Caution Important Safety Precautions TV Bracket assembly Top/Side panel diagram Remote Controller Battery Installation Using the Remote Control Install TV Set your TV Connect Antenna and power Turn On TV 10-11 Select Input Source 12-25 Picture Menu 13-14 Sound Menu 15-16...
Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Caution: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.2 19) Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). 20) Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.
TV Bracket assembly 1.Match the position hole in the middle of the stand poles to the position holes undter the bottom to the TV unit and connect the stand base with the TV unit, the position holes locates between the 2 screws of the stand poles. stand base 2.
Page 7
Top panel diagram Insert disc with shiny side facing the front of TV. (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby) LED Indicator: Press to turn on and off Indicator on(Red) Standby mode Indicator on(Green) Power on mode The functions of the buttons on the are as follows: SOURCE External signal input selection...
Side panel diagram VIDEO Service Port (Left Side) AC 100-240V~ 50/60Hz COAXIAL (Back Side) Name Function Description AV INPUT ANT 75 Ω Connect to ANT or cable source Connect to HDMI of DVD or other equipment HDMI2 IN Service Port For Upgrade Use.
Universal remote code This is the code for remote control of RLEDV2238A,if you want to change to a universal remote control,you can edit this code into your universal remote control. (1)Open the battery compartment cover on the back side (2)Insert two 1.5V batteries of AAA type...
DVD SETUP Press the “D.Setup” button to enter the DVD settings menu,use the “ ” buttons to select thedesired menu page (General / Audio / Dolby / Video / Preferences),and use “ ” buttons to select the items in each menu,then use “ ”...
Page 28
DVD SETUP 4.Video Setup Page Sharpness:adjust the sharpness of the image. Brightness:adjust the brightness of the image. contrast:adjust the contrast of the image. 5.Preference Page (Note:This menu page will pop up before put the disc into DVD.) TV Type: Select the local TV system (PAL TV/Multi/NTSC TV) Audio: Disc audio language selection (disc dependent) Subtitle: Disc subtitle language selection (disc dependent) Disc Menu: Disc Menu language selection (disc dependent)