Preparation Of Your Remote Control; Battery Installation; Battery Caution; Getting Started - Haier LET32T1000HF Instruction Manual

About your LED LCD TV
Preparation of Your
Remote Control

Battery Installation

Place the remote control face down, then open the
cover of the battery compartment.
Install two AAA batteries. (The + and - symbol of the
battery must match with the marks on the remote).
Close the cover of the battery compartment.

Battery Caution

Confirm there is no object between the remote control
and the remote sensor of the TV set.
Sunshine or other strong light will interfere with the
signal sent by the remote control.Avoid using nearby
Do not put the remote control in direct heat or in a damp
place as you may damage the remote.
Please use two AAA 1.5V batteries. Do not mix battery
types. Install the batteries at the correct polarities. Do
not use rechargeable batteries. If your TV is to be stored
for a period of time, remove the batteries from the
remote control.
EN-11 Digital LED LCD Television Instruction Manual
Do not throw away the battery with common domestic
according to local regulation.

Getting Started

Setting up

Location

You will need to place your TV near your plug socket
(so the power cable can comfortably reach) and within
reach of your aerial socket or extension lead.

Connection

Insert your TV aerial lead into the Antenna input at
the side of the TV.
Insert the batteries into the remote control. Make
sure they are inserted the right way around,
matching the polarity as indicated inside the battery
compartment.

Switching Your TV On

Press the POWER button on the right of the TV
once. A indicator light will appear in the right of
the screen.
Press POWER on the remote control.
on. This may take a few moments, and this display will
appear on the screen when the TV is turned on for the
first time.
Press OK button on the remote control to enter the
Backlight Mode menu.
The TV will turn