Advertisement
Assembly
1
1
#4 x
/
" Screw
2
• Fit the two mountain halves
together, as shown.
• Insert six screws into the
mountain assembly and tighten
the screws with a Phillips screw-
driver. Do not over-tighten.
6
LONGEST
SHORTEST
"Snap" the support pillars to
the underside of the spiral
track assembly, as shown,
working from the shortest
pillar to the longest.
2
PLAIN TREES
PLATFORM
WITH FENCE
• "Snap" the platform
with the fence onto the
mountain assembly .
• "Snap" the plain trees
into the mountain
assembly.
7
PLAIN GUARD RAIL
"Snap" the plain
guardrail into the
slots in the upper
spiral track.
3
MOUNTAIN TOP
"Snap" the mountain
top onto the mountain
assembly.
8
GUARDRAIL WITH TABS
• Locate the other guardrail
with the tabs.
• Fit a tab on one end of the
guardrail under the lower
spiral track, as shown.
• Bend the guardrail slightly
to fit the other two tabs to
the lower spiral track.
4
SNOWY TREES
LOWER SPIRAL
CHALET
TRACK
"Snap" the snowy trees
and the chalet into the
mountain top.
9
TUNNEL TRACK SUPPORT
LOWER RAMP
"Snap" the tunnel track
support to the tunnel.
5
UPPER SPIRAL TRACK
Slide the tab on the
upper spiral track into
the groove in the lower
spiral track to join the
two parts.
UPPER RAMP
10
TAB
1
#4 x
/
" Screw
2
• Fit the tabs on the upper
ramp into the slots in the
lower ramp.
• Insert two screws into
the upper ramp. Tighten
two screws with a
Phillips screwdriver.
Do not over-tighten.
Assembly is now complete!
Advertisement
