Generac Power Systems 5993-2 Specification page 2

Commercial Power Washers
specifications by model
Outlet Pressure - (PSI)/(BAR)
Flow Rate - (GPM)/(Liters/min)
Retail (49 State)
Engine
Engine Manufacturer
Engine Displacement
(Cubic Inch)/(cc)
Engine Type
Engine Orientation
Low Oil Shut Down System
Fuel Capacity - (Quarts)/(Liters)
Fuel On/Off Switch
Oil Capacity - (Oz)/(Liters)
Recomended Engine Oil
Throttle Control
Choke
Starting Method
On/Off Switch
Pump
Pump Type
Plunger
Material
Misc
Water supply temperature (°F)/(C°)
Hose
Hose length - (Feet)/(Meters)
Hose Material
Hose Dia. (Inch) / (mm)
Hose Rating
Hose Connectors
Detergent System
Chemical Tank(s) Number per unit
Chemical Tank(s) - Description
®
3100/213 3500/241 4000/276
2.8/10.6 3.6/13.6 4.0/15.1
59932 64160 59972
Generac Generac Generac
12.9/212 18.4/302 25.6/420
OHV (Over OHV (Over OHV (Over
Head Valve) Head Valve) Head Valve)
Horizontal Horizontal Horizontal
Yes Yes Yes
3.6/3.5 5.8/5.5 6.8/6.5
Yes Yes Yes
20/0.6 37/1.1 37/1.1
SAE 30 or SAE 30 or SAE 30 or
10W30 10W30 10W30
Manual Manual Manual
Manual Manual Manual
Manual Manual Manual
Yes Yes Yes
Triplex Triplex Triplex
Ceramic Ceramic Ceramic
Coated Coated Coated
Stainless Stainless Stainless
Steel Steel Steel
Aluminum Aluminum Aluminum
Body & Body & Body &
Brass Head Brass Head Brass Head
Double seal Double seal Double seal
system with system with system with
oversized oversized oversized
bearings bearings bearings
100/38 Max
35/10.7 35/10.7 50/15.2
Non-Marring, Steel Reinforced
Polyurethane (Gray)
3/8 / 9.5 3/8 / 9.5 3/8 / 9.5
4000psi 4000psi 4000psi
Quick Quick Quick
Change Change Change
0 0 0
Siphon Siphon Siphon
Hose Hose Hose
Generac Power Systems, Inc. • P .O. Box 8, Waukesha, WI 53187 • generac.com
©2013 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0192850SBY-E / Printed in U.S.A. 02/19/13
Nozzles
Nozzles - Number per unit
Nozzles - Description
Gun & Lance
Gun Professional
Gun to Lance Connection
Gun to Hose Connection
Lance Length (Inch/CM)
Lance to Nozzle Connection
Lance Material
Lance Connector Material
Warranty
Warranty
Frame & Misc.
Handle
Construction Welded Steel
Wheels
Dimensions and Weights
Unit Dimensions (Inches) (Handle in folded position)
Length (L)
Height (H)
Unit Dimensions (Inches) and Weight (lbs) (Handle extended)
Length (EL)
Width (W) [Wheel to Wheel]
Height (EH)
Unit weight including hose,
gun & lance (lbs)
Actual boxed weight
Actual boxed length
Actual boxed width
Actual boxed height
5 5 5
0, 15, 0, 15, 0, 15,
25,40, 25,40, 25,40,
Soap Soap Soap
Professional Professional
w/ adjustable w/ adjustable w/ adjustable
side handle side handle side handle
M22 M22 M22
Threaded Threaded Threaded
Quick Quick Quick
Change Change Change
20/51 33/84 33/84
Quick Quick Quick
Change Change Change
Stainless Stainless Stainless
Steel Steel Steel
Brass Brass Brass
3 Yr. 3 Yr. 3 Yr.
Limited Limited Limited
Folding Folding Folding
Welded Steel Welded Steel
(Roll Cage (Roll Cage (Roll Cage
Design) Design) Design)
3" x 10" 3" x 10" 4" x 12"
Never Flat Never Flat Pneumatic
24 1/2 27 3/4 27 3/4
28 3/4 31 7/8 31 7/8
31 3/4 34 1/2 34 1/2
24 1/2 26 3/4 28 1/4
38 42 1/2 42 1/2
102.5 129 146.5
120 150 164
26 29 29
25.5 28 28
31 33.5 33.5
2 of 2