Available Accessories - Generac Power Systems GUARDIAN SERIES 005870-1 Overview

AVAILABLE ACCESSORIES

Model # Product
5819 26R Wet Cell Battery
6212 Cold Weather Kit
Auxiliary Transfer Switch
5621
Contact Kit
5839 Fascia Base Wrap Kit
5703 Paint Kit
5662 - 8kW
5663 - 10kW Scheduled Maintenance Kit
5664 - 14kW
5928 Nexus Wireless Remote
Advanced Nexus Wireless
5951
Remote
®
Description
Every standby generator requires a battery to start the system. Generac offers the
recommended 26R wet cell battery for use with all air-cooled standby product.
If the temperature regularly falls below 32° F, install a cold weather kit to maintain
optimal battery temperature. Kit consists of battery warmer with thermostat built
into the wrap.
The auxiliary transfer switch contact kit allows the transfer switch to lock out a
single large electrical load you may not need.
The fascia base wrap snaps together around the bottom the new air cooled
generators. This offers a sleek, contoured appearance as well as offering protection
from rodents and insects by covering the lifting holes located in the base.
Bisque Kit
Generac's scheduled maintenance kits provide all the hardware necessary to
perform complete routine maintenance on a Generac automatic standby generator.
Completely wireless and battery powered, Generac's Nexus wireless remote monitor
provides you with instant status information without ever leaving the house. Not
compatible with CorePower or EcoGen systems.
Remotely control generator functions with the advanced model's LCD display. In
addition to remote testing of the generator, set the excercise cycle and maintenance
interval reminders. Not compatible with CorePower or EcoGen systems.
Generac Power Systems, Inc. • S45 W29290 HWY. 59, Waukesha, WI 53189 • generac.com
©2012 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0186140SBY-H Printed in U.S.A. 10/05/12