CLEANING AND MAINTENANCE Continued
Cleaning Stainless Steel
All stainless steel body parts should be wiped regularly with
hot, soapy water during the day, and with a liquid cleaner
designed for this material at the end of each day. Do not
use steel wool, abrasive cloths, cleansers, or powders! If it
is necessary to scrape stainless steel to remove encrusted
materials, soak the encrusted area with wet cloths to loosen
the material, then use a wood or nylon scraper. Do not use
a metal knife, spatula, or any other metal tools to scrape
stainless steel. Scratches are almost impossible to remove.
SERVICE AND PARTS
Installation, maintenance and repairs should be performed
by your local authorized U.S. Range service agency listed in
your information manual pamphlet.
Page 8
Part # 1382699 (02/26/08)