Still Mode; Switching Each Input Mode; Switching Audio Mode - Sylvania LD260SS1 Owner's Manual

 Still Mode
You can pause the image shown on the TV screen.
Press [PAUSE F] to pause the image shown on the TV
screen.
• The sound output will not be paused.
• The still function will be released after 5 minutes.
To cancel still mode, press any button except [POWER].
 Switching Each Input Mode
You can easily switch with the remote control between TV (ATSC or NTSC)
and external devices when they are connected to the unit.
Press [INPUT SELECT] or [CH K ] repeatedly to cycle
through the input modes.
or
Pressing [CH L ] reverses the direction of the input
modes.
Still
Input Select
TV
Video
Component
HDMI1
HDMI2
DTV/TV channel
Video
Component
HDMI1
(or PC input)
HDMI2
Español
 Switching Audio Mode
This section describes how to switch the audio in the analog mode and how
to switch the audio language in the digital mode.
ATSC
1
Press [AUDIO] to display the currently selected
language and the number of available languages.
2
Press [AUDIO] repeatedly to cycle through the
available audio languages.
• Available languages differ depending on the
broadcast. "Other" is displayed when the audio
language cannot be acquired, or the acquired
languages are other than English, Spanish or French.
Note:
• [AUDIO] does not control external audio devices.
• The information display will automatically disappear in a
few seconds.
NTSC
Press [AUDIO] to display the currently selected
audio mode. While receiving an MTS broadcast,
press repeatedly to cycle through the available audio
channel.
When all audio are available
SAP / STEREO
SAP /
When stereo and monaural audio are available
MONO / STEREO
When SAP and monaural audio are available
SAP / MONO
When only monaural audio is available
(cannot be switched)
STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
Français English
11-1
English 1/3
11
SAP / STEREO
SAP / MONO
STEREO
MONO / STEREO
SAP / MONO
MONO
17
EN