Setting up Monitoring Software
8) Select the Unknown FC port of the fibre channel switch to which this device
9) The "New Storage device setup" dialog box is displayed. Select the
2-12
is connected, and then drag and drop it onto the created LT20 S2/LT40
S2/LT60 S2.
"Embedding Information (Required)" tab and then set information on a drive
in this device.
Operation failure
For "Device Name," specify a name that is different from the
device name of the created LT20 S2/LT40 S2/LT60 S2.
Caution
P3AM-5262-01ENZ0