Fujitsu ETERNUS LT20 S2 User Manual page 55

Event List
Network Failure
Network Failure
Network Failure
Net HW Failure
Net HW Failure
Net HW Failure
Network Failure
Upgrade failed
Hardware Error
Hardware Error
Hardware Error
Hardware Error
Hardware Error
Hardware Error
Hardware Error
System Error
System Error
SCSI HW Error
Invalid Barcode
Hardware Error
Hardware Error
Hardware Error
Drive Overtemp.
Drive Comm.-Err.
Drive Sled Miss.
Drive Broken
Load Timeout
Unload Timeout
4-6
Table 4.3 Critical Events (2/2)
Events Events Code
0xC0 HE: network init
0xC1 HE: telnet interface
0xC2 HE: webserver
0xC3 HE: EEPROM parameter
0xC4 HE: cannot init LanCard
0xC5 HE: write data to EEPROM fail
0xC6 HE: ping (target not reached)
0xC7 HE: cannot upgrade from USB
0xD0 HE: ROM Error
0xD1 HE: RAM Error
0xD2 HE: NVRam Error
0xD3 HE: UART Error
0xD4 HE: display error
0xD5 HE: display error
0xD6 HE: memory Error
0xD7 HE: fatal system error
0xD8 HE: data base error
0xD9 HE: no SCSI IC detected
0xDA HE: different barcode labels
0xDB HE: Fan Failure
0xDC HE: Internal I2C Bus Error
0xDF HE: Power Supply has Failed
0xF0 HE: drive over-temperature
0xF1 HE: drive communication error
0xF2 HE: drive sled not present
0xF3 HE: drive broken: needs repair
0xF4 HE: drive load timeout
0xF5 HE: drive unload timeout
Description
P3AM-5262-01ENZ0