Table of Contents
Advertisement
Battery Replacement (Aquarium)
For best performance, we recommend replacing the batteries that came with the
aquarium with four, new "C" (LR14) alkaline batteries.
• Locate the battery compartment on the back of the aquarium.
• Loosen the screws in the battery compartment door with a Phillips screwdriver.
Remove the battery compartment door. Remove the exhausted batteries and throw
them away.
• Insert four new "C" (LR14) alkaline batteries.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screws. Do not over-tighten.
•
If the aquarium begins to operate erratically, you may need to reset the electronics.
Slide the power/volume switch off and then back on.
IMPORTANT! Under normal use conditions, the batteries in the aquarium will require
replacement more often than the batteries in the remote. When sounds, lights or
motions from the aquarium become faint or stop, it's time for an adult to replace the
batteries in the aquarium.
2
1.5V x 4
"C" (LR14)
Advertisement
Table of Contents
