Section 6 − Replacing The Battery - Hobart Hood XVX Manual

Expert series auto-darkening helmets
Table of Contents

Advertisement

SECTION 6 − REPLACING THE BATTERY
+
OM-240 362 Page 10
To replace the batteries, remove
the
assembly (see Section 5).
1
After removing the lens assembly,
slide the battery holding trays out
and remove the old batteries.
Replace with CR2450 lithium type
batteries (2 required) or equivalent
(Hobart Part No. 770 284).
.
Reinstall the battery trays. To test,
press the Reset button. The lens
should flash dark twice. Reinstall
the lens assembly.
.
Be sure Positive (+) side
of battery faces up.
+
1
auto-darkening
Battery Tray
Be sure Positive (+) side of the
battery faces up (toward inside
of helmet).
Left and right battery trays are
not
interchangeable.
auto−darkening helmet will not
work if battery trays are
installed on the wrong sides.
lens
The
804 847

Advertisement

Table of Contents
loading

Table of Contents