Advertisement
Changing a settings sample of
ADVANCED SHIFT
Assignments set by the settings file of ADVANCED SHIFT may be changed to meet your operating
environment.
Before changing any specific function assigned to [Button/Knob], delete the function assigned to the
[Button/Knob] in the settings sample.
The functions of [Button/Knob] are described in the "APPENDIX - Function list of settings sample of
DJM-T1 ADVANCED SHIFT".
[Button/Knob]:
[Function]:
[MIDI]:
[TRAKTOR2 Control]: "Control" defined in the assignment table of TRAKTOR 2 Controller Manager.
Follow the procedures below to change the settings sample assigned using ADVANCED SHIFT.
1
View the information in the settings sample.
Look for the information of [MIDI] and [TRAKTOR2 Control] associated with the [Button/Knob]-[Function]
you want to change in the "APPENDIX - Function list of the settings sample of DJM-T1 ADVANCED SHIFT."'
In some cases, multiple functions listed in [TRAKTOR2 Control] may be assigned to a single
[Button/Knob]-[Function].
2
Connect DJM-T1 to the computer by the USB cable and turn on the power of DJM-T1.
3
Start Traktor 2.
The name of buttons and knobs of DJM-T1.
Traktor 2 functions controlled by buttons and/or knobs when ADVANCED
SHIFT is ON.
MIDI code output when Button/Knob is pressed/turned.
8
Advertisement
