Converting Tosidedischarge - Troy-Bilt Smart Speed 566 Operator's Manual

Converting ToMulcher
1. Lift the rear discharge door on the mower and lift
the grass catcher up. Release the discharge door
to allow it to close the rear opening of the mower.
Converting ToSideDischarge
1. Make sure the grass catcher is off the unit and the
rear discharge door is closed. Refer to Figure 9.
2. On the side of the mower, lift the mulching plug.
See Figure 9.
3. Slide the two hooks of the side-discharge chute
under the hinge pin on the mulching plug assembly.
Lower the side mulching plug.
4. Do not remove the side mulching plug at any time,
even when you are not mulching.
Hinge Pin_
Hooks
_
f
(Slide hooks under the two
sides of hinge pin)
Figure 9
,,Mulching Plug
/
jDeflector