Using The Aux Source - Pioneer FH-P8900MD Owner's Manual

1. Press ENT and BG and then press BGV
to select the background visual mode.
2. Press any of the buttons BGV1 – BGV5 to
select the desired visual.
Setting the background still picture
The background still pictures are only for the
display form 1 "FORM 1". There are three
stored background still pictures to select from.
• When you select "FORM 2", "BG" is not dis-
played and this mode is inactive.
1. Press ENT and BG and then press BGP
to select the background still picture
mode.
2. Press any of the buttons BGP1 – BGP3
to select the desired picture.
Canceling the entertainment display
You can cancel the entertainment display (the
movie screens, the spectrum analyzer displays,
etc.).
• Press ENT and then press OFF to cancel
the entertainment display.
U
sing the AUX source
An IP-BUS-RCA interconnector such as the
CD-RB20 or CD-RB10 (sold separately) lets
you connect this product to auxiliary equipment
featuring RCA output. For more details, refer to
the IP-BUS-RCA interconnector's owner's man-
ual.
Selecting AUX as the source
• Press (up or down) SOURCE to select
AUX as the source.
Press (up or down) SOURCE until "AUX"
appears.
Entering the AUX title
The title displayed for the AUX source can be
changed.
1. Press (up or down) SOURCE to select
AUX as the source.
Press (up or down) SOURCE until "AUX"
appears.
2. Press FUNC and then press TTLin to
select the AUX title input mode.
Refer to "Entering disc titles" on page 26,
and perform procedures 3 to 7 in the same
way.
Note:
• Even if you do not press TTLin you can enter the
title, but you will not be able to change the charac-
ter types.
44