Built-In Md Player; Display And Indicators; Basic Operation - Pioneer FH-P8900MD Owner's Manual

Built-in MD Player

D
isplay and indicators
FORM 1
q
e
FORM 2
q
e
qSource name
wTrack number
eDisc title
rMDLP indicator (X2 or X4)
tPlay time
yTrack title
B
asic operation
You can only load one MD at a time in the Built-
in MD player. Load the MD in the direction of
the arrow, with the label side facing up.
1. Press MD EJECT to open the front panel.
2. Insert an MD into the MD loading slot.
When an MD is inserted, the front panel
closes automatically.
19
w
r t
w r
y t
MD loading slot
3. Press (up or down) VOLUME to adjust the
volume.
4. Press 2 or 3 to select a track.
Pressing 3 skips to the start of the next
track.
Pressing 2 once skips to the start of the cur-
rent track. Pressing again will skip to the
previous track.
• If you press and hold 2 or 3, you can per-
form fast forward or reverse.
5. Press MD EJECT to eject the MD.
The front panel opens and the MD is ejected.
• Be sure to close the front panel by press-
ing MD EJECT after removing the MD.
WARNING:
• Do not use with the front panel left fully open.
If the front panel is left open, it may result in
injury in the event of an accident.
Note:
• You can select MD as the source by pressing (up
or down) SOURCE when a disc is loaded in this
product.
• Do not insert anything other than an MD into the
MD loading slot.
• An MD left partially inserted after ejection may incur
damage or fall out.
• Load an MD after confirming the MD shutter (refer
to page 46) is closed.
• When you load a disc, this product reads informa-
tion recorded on the disc such as the number of
tracks. While the disc is being read, "TOC read" is
indicated in the display.
• If the Built-in MD player cannot operate properly, an
error message (such as "ERROR-11") appears on
the display. Refer to "Understanding built-in MD
player error messages" on page 47.
• When you play MDs featuring long recordings, the
MDLP indicator is displayed. (Refer to "Display and
indicators" on this page.)
• When you load an MD or switch from another
source to the built-in MD player when an MD is
loaded, disc and track titles are automatically
scrolled once in the display. When you select a
track, the track title is also automatically scrolled
once in the display. (The title of the track you are
currently listening to is not scrolled if you return to
the start of that track.)