Viewing From A Desired Camera Angle (Multi-Angle); Selecting The Type Of Search Mode - Pioneer DV-S88A Operating Instructions Manual

Viewing from a Desired
Camera Angle (Multi-Angle)
– DVD
You can select a camera angle when viewing DVDs with
the multi-angle option.
OPEN /
CLOSE
DISPLAY AUDIO SUBTITLE ANGLE
SET UP TOP MENU
MENU
ENTER
Press ANGLE during playback.
The camera angle changes each time you press the
button.
ANGLE : 1/4
\
»
ANGLE : 4/4
|
Notes
• You can use the Multi-Angle function only with discs
featuring recordings of images shot from different camera
angles.
• During Multi-Angle playback, the ANGLE indicator in the
display lights.
• For some discs, selection can be made using the DVD
menu.
In this case, press MENU to display the DVD menu screen
and then make your selection.
To check whether or not a disc is recorded with
angles:
The jacket of discs that are recorded with angles will be
marked with . When locations on discs that are recorded
with angles are played back, the ANGLE indicator can be
displayed.
To cancel the angle mark, set [Angle Indicator] to [Off] in the
Setup screen Video menu described in the section below.
ANGLE
ANGLE : 2/4
«
ANGLE : 3/4
Turning the angle indicator on and
off
Expert
When a picture recorded in different angles is played
back is displayed on the screen. This setting lets you
see clearly whether the playback picture is recorded in
multiple angles or not.
Turn the angle indicator on or off in the [Angle
Indicator] setting in the Setup screen Video menu in
the [Expert] menu mode (page 29).
Audio1 Audio2 Video
TV Screen – 16:9(Wide)
Component Video – Interlace
S-Video Out – S2
Still Picture – Auto
On Screen Display – Position-Normal
Angle Indicator On
Frame Search – Off
Move
Settings: On* ( is displayed)
Off (Not Displayed)
Note
Even when the [Angle Indicator] setting is set to [Off], the
ANGLE indicator in the display panel of the player lights during
multi-angle playback. Therefore, it is possible to know when
the multi-angle function can be used without having to display
the icon on the screen.
Selecting the type of search
mode
Expert
– DVD-Video
Set this On if you want to be able to do frame-accurate
searching of DVD-Video discs (see page 55 for how to do
a time & frame search).
Make changes in the [Frame Search] in the Setup
screen Video menu in the [Expert] menu mode (page
29).
Audio1 Audio2 Video
TV Screen – 16:9(Wide)
Component Video – Interlace
S-Video Out – S2
Still Picture – Auto
On Screen Display – Position-Normal
Angle Indicator On
Frame Search Off
Move
Settings: On
Off*
Note
Time/time & frame search is not possible with DVD-Audio and
DVD-RW (DV-S88A only) discs.
Language General
On
Off
Exit
SETUP
* Factory setting
Language General
On
Off
Exit
SETUP
* Factory setting
39
En