Advertisement
To Use Decks C and D as Track Decks
1
Using the procedure under "Deleting Settings Files" on page 5, delete the "Pro 2 Sample
Deck 1- Pioneer.DDJ-T1 (XXX_XXXXXXXX, XXX_XXXXXXXX)" and "Pro 2 Sample Deck 2-
Generic MIDI (XXXXXX (XXXXXX),XXXXXX (XXXXXX))" sample deck control mappings.
2
Disconnect the DDJ-T1 from the PC/Mac, then reconnect it.
* Problems may arise with TRAKTOR PRO 2 control if the DDJ-T1 is reconnected while TRAKTOR PRO 2
is running.
It is recommended that you reconnect the DDJ-T1 using the following procedure:
1 Quit TRAKTOR PRO 2.
2 Disconnect the DDJ-T1 from the PC/Mac, then reconnect it.
3 Relaunch TRAKTOR PRO 2.
3
Click the letter for the deck whose assignment you want to change, then select [Track Deck].
6
Advertisement
