Toshiba Carrier RBC-AX22CUL Owner's Manual page 5

Wireless remote controller kit Owner's Manual
, The signal receiving unit is mounted to the ceiling panel.
it Signal Receiving Unit
, The signal receiving unit is attached to the indoor unit.
, Hereinafter, all remote controller button names are indicated with respective symbols displayed
on the remote controller.
1
©
4
5
2
6
1 Emergency operation button
(See 13 page.)
2 Signal receiving unit
The signal sent from the remote controller
is received.
3
Display lamp
One of displays flashed while a trouble
occurs. When the display lamp flashes,
refer to "Before asking of repair" in 14 page.
4 (_ lamp
This lamp goes on during operation.
5 Q lamp
This lamp goes on while the timer is
reserved.
6 ® lamp
, [n heating operation this lamp in the
following cases;
The operation has started.
The temp. controller has worked.
The unit is under defrost operation.
, This lamp flashes while a trouble occurs.
Z_ CAUTION
, If "pi, pi" sound is heard, the MODE lamp of the display lamp goes on, and the (Z) lamp and
lamp flash alternately, the operation is not performed with the desired mode.
, Even if you push _ , [] or _ when remote controller operation is disabled by the central control or
other means, "pi" is heard 5 times and the button operation is not accepted.
4 English-4