Toshiba 24V4210U User Manual page 133

Basic DiscPlayback
121
Disc playback
Higher quality picture:
High resolution pictures on some discs may occasionally cause
noise on the picture display. If this is the case, reduce the
Sharpness setting under the Picture Settings menu.
NOTE
.:.Keep yourfingerswellclearofthe discslot whena disc is
loadingor unloading.Failureto do so maycause serious
personal i njury.
¢ DonotmovetheTVduringplayback. D oingsomaydamage the
disc.
o:o Whena disc is inserted whentheTVis notin DVDmode,theTV
will automatically switchto DVDmode.
This indicates the kind of disc that can employ the function
described under that heading.
o:o DYD: You can use this function with DVDs.
o:o VCD: You can use this function with Video CDs.
o:o CD: You can use this function with Audio CDs and CD-R/RW
discs.
Removing a disc
1 Press tile EJECT button on tile TV control panel or on tile
remote control.
2 Wait for the disc to be ejected and then remove the disc from
the slot.
Discplayback reminders
o:o If the LED TV/DVD combination does not operate properly,
static electricity build-up may be the cause. Turn off the LED
TV/DVD combination, then disconnect the power cord from
the AC outlet. Reconnect the power cord, then press the
POWER button to turn on the LED TV/DVD combination
again.
o:o If an incompatible disc is loaded, one of the following error
messages appears on-screen: "Incorrect Disc," "Wrong
Region," or "Please Enter Pws." If this is the case, check your
disc again.
o}o In some instances the LED TV/DVD combination may take a
few minutes to start disc playback.