3.3
Chapter Point
Entry
Operation
###
CHP
Each chapter point operation entry needs to come right after the Title Record entry
(In/ OUT Point Rec) in the order of occurrence. A Chapter Point must have the
same Entry Number as the In/Out Point Rec.
3.4
Wait
Entry
Operation
###
WAI
Wait is useful when the source tape requires exchanging. When executed, a
window prompts the user to change source tapes. When the exchange has been
completed the user presses Enter to continue execution of the EDL.
3.5
Finalize
Entry
Operation
###
FNL
This command can only used as the last entry in an EDL. It will be ignored if the
PRV-LX1 target is set for HDD. There are no parameters for the finalization
command.
Parameter
Chapter Point (Chapter points are in SMPTE time code)
Parameter
Parameter
Page 5 of 6
PRV-LX1Guide
EDL Commands