Summary of Contents for Fisher-Price BOUNCE 'N PLAY ACTIVITY DOME 79534
Page 1
BOUNCE ’N PLAY ACTIVITY DOME Model Number: 79534, 79545, 79546 Please save these instructions for future reference. Tool needed for assembly: Phillips Screwdriver (not included). Use only for a child who is unable to push up on hands and knees, pull up or sit unassisted. Product features may vary from picture above.
Usually we can solve the problem on the telephone or by sending you replacement parts. Please call Fisher-Price® Consumer Relations, toll-free at 1-800-432-KIDS, 8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470.
Page 3
3 Toys (Toys may be different than shown) 2 Base Wires Plastic Mesh Cover Stay CAUTION In its unassembled state, this product contains small parts. Adult assembly is required. PARTS 2 Covers Base M5 x 1 M6 x 1 M5 Lock Nut - 2 SHOWN ACTUAL SIZE Metal Canopy Stay Spring - 4...
Page 4
IMPORTANT! Before each use or assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts.
Page 5
• Tighten the screws with a Phillips screwdriver. Do not over-tighten. • Repeat this procedure to attach the other ends of the frame tubes to the frame on the other side of the base. Frame Lower Hole Base Wire Spring - 4 M6 x 1 "...
Page 6
ASSEMBLY Toys Fastener • Fasten the pad fasteners to the base fasteners. • Lift the canopy. • Attach the toys to the canopy fasteners. IMPORTANT! Assembly is now complete, but Bounce ‘n Play Activity Dome is not ready for use. Please refer to the Use instructions, on this page, beginning with step 2.
Frame Groove Base Wire • Push down on the product to be sure each side of the base wire is in the correct position. The base wire should rest in the groove in each frame. • Repeat Use steps 1 - 3 to unfold the other base wire.