Advertisement
ASSEMBLY
Wire
7
Paddle
Paddle
Flowers
Sockets
Butterfly
• Fit the toy bar plugs into the socket in
each plastic cover.
• Snap the paddles to the toy bar wire.
• Fit the tab on the butterfly into the
slot in the paddle.
• The flowers can be attached to the paddles.
Hint: Twist the ends of the flowers apart to attach them to the paddles.
Assembly is now complete.
• The toy bar is removable. Simply pull up to remove.
Toy Bar
Plugs
8
9
BATTERY INSTALLATION
–
"D" (LR20)
SHOWN ACTUAL SIZE
Battery Compartment
Door
Soothing Unit
• Lift the footrest wire. Remove the pad from the footrest wire.
• Insert a coin into the battery compartment door and pry the battery
compartment door off.
• Insert one, size "D" (LR20) alkaline battery, as indicated inside the
battery compartment. Be sure to place the battery on top of the ribbon.
Hint: For easy battery removal, simply lift the ribbon.
• Replace the battery compartment door and be sure it snaps securely closed.
• Replace the bottom of the pad onto the footrest wire.
• Lower the footrest wire.
+
1.5V
10
Advertisement
