Heat & Glo Cerona-36 Installation & Operating Instructions
Heat & Glo Cerona-36 Installation & Operating Instructions

Heat & Glo Cerona-36 Installation & Operating Instructions

Galleria doors
Hide thumbs Also See for Cerona-36:

Advertisement

Leave this manual with party responsible for use
and operation.

WARNING

HOT! DO NOT TOUCH.
SEVERE BURNS MAY RESULT.
CLOTHING IGNITION MAY RESULT.
Glass and other surfaces are hot during operation and cool
down.
• Keep children away.
• CAREFULLY SUPERVISE children in same room as
appliance.
• Alert children and adults to hazards of high temperatures.
• Do NOT operate with protective barriers open or removed.
• The doors must remain closed if children will be present
during the operation of the fi replace.
• The doors may be made operable per these instructions.
This may be done only upon request of a person responsible
for the use and operation of the fi replace.
• The doors can be returned to the locked position following
these instructions.
• Keep clothing, furniture, draperies and other combustibles
away.
• When the doors are in an operable state, the door-locking
screw must be retained in the threaded nut behind doors.
WARNING! Risk of Fire! Combustible materials MUST
NOT overlap or be placed under a surround.
CAUTION! Do not install damaged components.
1. To lock the doors shut, insert the black 10-24 Phillips
head bolt through the small notches by the handles.
Tighten the bolt into the threaded insert mounted
between the spring clips on the lower hinge bracket
See Figure 1.
Galleria Doors
Cerona-36 and Cerona-42
Installation & Operating Instructions
Heat & Glo • Galleria Doors • 2106-937 Rev. C • 5/11
SEE DETAIL
LOCKING BOLT
Figure 1.
2. To unlock the doors, remove the bolt and open the
doors. Reinstall the bolt into threaded insert from the
back side so the bolt doesn't interfere with the door.

Cleaning Instructions for Doors

Use a microfi ber cloth and Windex® Original Glass
Cleaner or 03M003 Stove Bright® Glass Cleaner to clean
the door immediately after installation to remove acids
deposited by the installer or technician. Spray the cleaner
onto the microfi ber cloth and carefully wipe the entire
surface. The door should be cleaned in this manner
annually by the homeowner to remove fi ngerprints or
other contaminants. Once oxidation of the paint pigment
has occurred, cleaning will not restore the original color.
HANDLES

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Cerona-36 and is the answer not in the manual?

Questions and answers

Summary of Contents for Heat & Glo Cerona-36

  • Page 1 Galleria Doors Cerona-36 and Cerona-42 Installation & Operating Instructions Leave this manual with party responsible for use and operation. WARNING HOT! DO NOT TOUCH. SEVERE BURNS MAY RESULT. CLOTHING IGNITION MAY RESULT. Glass and other surfaces are hot during operation and cool down.
  • Page 2 3. See Figure 2 for assembly details on Cerona-36 and Figure 3 for assembly details on Cerona-42. Figure 2. Cerona-36 Heat & Glo • Galleria Doors • 2106-937 Rev. C • 5/11...
  • Page 3 Figure 3. Cerona-42 Please contact your Heat & Glo dealer with any questions or concerns. For the location of your nearest Heat & Glo dealer, please visit www.heatnglo.com. Heat & Glo, a brand of Hearth & Home Technologies Inc. 7571 215th Street West, Lakeville, MN 55044 www.heatnglo.com Heat &...

This manual is also suitable for:

Cerona-42Cerona-42

Table of Contents