Framing And Clearances; Select Appliance Location - Heat & Glo 6100PLUS Owner's Manual

3 3

Framing and Clearances

Note:
• Illustrations refl ect typical installations and are FOR
DESIGN PURPOSES ONLY.
• Illustrations/diagrams are not drawn to scale.
• Actual installation may vary due to individual design
preference.
A. Select Appliance Location
When selecting a location for your appliance it is important to
consider the required clearances to walls (See Figure 3.1).
1/2 in. (13 mm)
min.
appliance
to combustibles
50-5/8 in.
(1286 mm)
Figure 3.1 Appliance Locations
6
50-5/8 in.
(1286 mm)
Drywall
42 in.
(1067 mm)
In addition to these framing dimensions, also reference the
following sections:
• Clearances and Mantel Projections (Sections 3.C. and 3.D.)
• Vent Clearances and Framing (Section 6)
Hearth & Home Technologies • 6100PLUS • 4041-127 Rev D • 09/05
WARNING
Fire Risk
Provide adequate clearance:
• Around air openings.
• For service access.
Locate appliance away from traffi c areas.
Note : For actual applianc e dimensions refer to
Section 14.
42 in.
(1067 mm)
43 in.
(1092 mm)
Alcove
Installation
42 in.
(1067 mm)
(597 mm)
23-1/2 in.
(597 mm)
48 in.
(1219 mm max.)
23-1/2 in.