Page 3
Parts IMPORTANT! Please remove all parts from the package and identify them before assembly. Some parts may be packed in the pad. 2 Swing Frames Hint: To allow the product to swing properly, the swing arm-to-frame (with power switch) connection is designed to be loose.
Page 4
PULL UP • While standing on the base tube, pull the front legs up. The front legs should remain secured to the base tube. If you can remove the front legs, you have not assembled them correctly to the base tube. Re-read and repeat assembly step 2.
Page 5
Seat Hub Seat Hub • Insert a screw through the outside of each seat hub. Tighten the screws. Waist Belts Waist Belt • Fit the pad upper pocket over the seat back tube. • From behind the assembly, insert the waist belts through the slots in the pad.
Battery Installation Hint: We recommend using alkaline batteries for longer battery life. Note: Low battery power may cause product movement to slow and sound volume to become faint or turn off all together. If this should happen, please remove and discard all four batteries and replace with four, new “C”...
WARNING To prevent serious injury and/or falls and being strangled in the restraint system: • Always use the restraint system. • Not recommended for children who can sit up by themselves (6 months approximately, until 9 kg/20 lbs). • Never leave child unattended. •...
Page 8
Swinging and Music • Place your child in the seat and secure properly. Hint: After turning on power, this product may not swing unless there is a child in the seat. • Slide the power switch to any of five speed settings. •...
Need help?
Do you have a question about the RAINFOREST M6711 and is the answer not in the manual?
Questions and answers