Page 3
Assembly IMPORTANT! Before assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts. PULL UP Swing Frame Front Leg Swing Frame Back Leg Base Tube...
Page 4
Assembly Seat Hub PULL UP Seat Hub Base Tube • Insert a 3 cm screw through the outside of each seat hub and into each frame arm. Tighten the screws. • While standing on the base tube, pull the back legs up. The back legs should remain secured to the base tube.
Page 5
Assembly Battery Installation Hint: We recommend using alkaline batteries for longer battery life. Pad Lower Pocket 1,5V x 4 LR14 (“C”) Note: Low battery power may cause product movement to slow and sound volume to become faint or turn off all together. If this should happen, please remove and discard all four batteries and replace with four, new LR14 (“C”) alkaline batteries.
Page 6
Securing Your Child WARNING Waist Belt To prevent serious injury or death from falls and being strangled in the restraint system: • Always use the restraint system. • Not recommended for children who sit up by themselves (6 months Buckle approximately, until 9 kg/20 lbs).
Page 7
Starting the Swing Room-to-Room Portability IMPORTANT! Before each use, inspect this product for damaged • Make sure your child is properly secured in the swing seat. hardware, loose joints, missing parts or sharp edges. DO NOT use if • Grasp both handles on the top of the swing and lift. any parts are missing or broken.
Page 8
Storage Care The pad and soft toys are machine washable. Place the soft toys in a pillow case. Wash the pad and toys separately in cold water on the gentle cycle. Do not use bleach. Line dry. The frame can be wiped clean using a mild cleaning solution and a damp cloth.
Need help?
Do you have a question about the M0324 and is the answer not in the manual?
Questions and answers