Meridian 566 User Manual page 19

To connect to a 502 Analogue
Controller
502 Analogue Controller
CD
XLR audio leads
Connect the BALANCED OUTPUT LEFT and RIGHT XLR
sockets on the back panel of the 566 24-Bit Digital to
Analogue Converter to the balanced CD inputs of the
502 Analogue Controller, using two XLR to XLR audio leads.
566 24-Bit Digital to Analogue
Converter
BALANCED
OUTPUTS
To connect to a DAT recorder, or
other digital source
Connect one of the digital inputs D1, D2, or D3 on the back
panel of the 566 24-Bit Digital to Analogue Converter to the
digital output of the other equipment, using a digital lead.
If the other equipment provides an AES/EBU standard digital
output this can be connected to the D1 input using the
alternative XLR connector.
15