Analogue Outputs - Meridian 566 User Manual

Analogue outputs

The following two alternative audio outputs are provided:
Output
Output
Balanced output
To connect to other Meridian 500
Series equipment
566 24-Bit Digital to Analogue
Converter
COMMS
Connect one of the COMMS sockets on the back panel of the
566 24-Bit Digital to Analogue Converter to one of the
COMMS sockets on another 500 Series unit, using the 500
comms lead provided.
14
Description
Unbalanced analogue output, 2V
nominal, on RCA phono pair.
Balanced analogue output on XLR
connectors.
500 Series unit
COMMS
The sequence in which you connect the units is not important.
Note: Do not, under any circumstances, connect any equipment
other than Meridian 500, 600, or 200 Series to the socket
marked COMMS on the back of the 566 24-Bit Digital to
Analogue Converter.
To connect to a 500 Compact Disc
Transport
566 24-Bit Digital to Analogue
Converter
D1
Digital lead
Connect the DIGITAL OUTPUT on the back panel of the
compact disc transport to the D1 input of the 566 24-Bit
Digital to Analogue Converter, using the digital lead provided.
Alternatively, the D2 or D3 inputs may be used if preferred.
500 Compact Disc Transport
DIGITAL
OUTPUT