Advertisement
Power Button and L.E.D.
Range Indicator
• Place a receiver in the room where you intend to use it.
• Press the power button to turn the power ON. Wait a few seconds to see if you have a good signal.
If the range indicator light blinks along with beeping, you are out of range. Move the receiver closer
to the transmitter.
Hint: If you'd like to use AC power, use the AC adaptor/charger.
• When sound is picked up by a receiver, the sound lights turn on.
- One or two lights indicate quieter sounds.
- Three or more lights indicate louder sounds.
Testing Sound Reception
11
Sound Lights
Advertisement
