Using The Tv; Using The Remote Control; Turning The Tv On And Off; Selecting Channels - HANNspree MAK-000039 User Manual

2.3 Using the TV

2.3.1

Using the Remote Control

For best results, use the remote control within a proper distance from the
front of the TV. Do not exceed an angle of 30 degrees when pointing at the
TV.
Notes:
• The operational distance may be shortened when the signal sensor is
directly exposed to strong light.
• Aim the transmitter on the remote control at the signal sensor and
ensure that there are no obstacles between them.
2.3.2

Turning the TV On and Off

1
Press power on the remote control or on the control panel. The power
LED indicator on the front of the TV changes from red to green,
indicating that the power is on.
2
Press power again. The power LED changes from green to red,
indicating that the TV is off.
2.3.3

Selecting Channels

• Press channel up on the remote control or control panel to increase
the channel number by one. Press channel down to decrease the
channel number by one.
• Enter the specific channel number by pressing the number buttons
on the remote control. The channel number is displayed on the
screen.
36